Configuration Examples

CLI:Example for Configuring a Device as a DHCP Server (Based on an Interface Address Pool)

CLI:Example for Configuring a Device as a DHCP Server (Using Global Address Pool-based Layer-3 Ethernet Interfaces): This configuration example helps you understand how to use Layer-3 Ethernet interfaces to configure a device as a DHCP server based on a global address pool, and enable the DHCP server to provide dynamic address allocation, static address allocation, egress gateway address, DNS server address, WINS server address, and other services for clients.

CLI:Example for Configuring a Global Address Pool-based DHCP Server (Using Sub-interfaces): After learning this configuration example, you can understand how to use the FW sub-interfaces to configure a DHCP server based on global address pools, and enable the DHCP server to provide services for DHCP clients on VLANs, including dynamic address allocation, gateway address, DNS server address, and WINS server address.