<Huawei> system-view [Huawei] interface dialer 0 [Huawei-Dialer0] display this # interface Dialer0 link-protocol ppp ppp chap user test ppp chap password simple ub dialer user admin dialer bundle 10 dialer-group 5 # [Huawei-Dialer0] quit
[Huawei] interface gigabitethernet 0/0/1 [Huawei-GigabitEthernet0/0/1] display this # interface GigabitEthernet0/0/1 pppoe-client dial-bundle-number 10 # [Huawei-GigabitEthernet0/0/1] quit
[Huawei] dialer-rule [Huawei-dialer-rule] display this # dialer-rule dialer-rule 5 ip permit #
The dialer access group number configured by running the dialer-rule command in the dialer-rule view and the dialer access group number configured by running the dialer-group command in the dialer interface view must be the same.
If the on-demand parameter is displayed behind pppoe-client dial-bundle-number, the PPPoE client works in the on-demand dialing mode (packet triggering mode). This means that the PPP link will be torn down when there is no traffic to be transmitted.