| Component | Model | Quantity |
|---|---|---|
| * Chassis | ||
| Management Module | ||
| Switch/Pass-Thu Module | ||
| * Compute Node | ||
| * Fan Module | ||
| * PSU | ||
| Component | Type | Model | Quantity |
|---|---|---|---|
| * Server | |||
| * HDD Backplane | |||
| * CPU | |||
| * Memory | |||
| * Fan Module | |||
| Front Disk | |||
| Rear Disk | |||
| Middle Disk | |||
| LOM | |||
| RAID Card | |||
| PCIe Card | |||
| * PSU | |||
| Component | Model | Quantity |
|---|---|---|
| * Chassis | ||
| * Server Node | ||
| * Fan Module | ||
| * PSU | ||
| Component | Type | Model | Quantity |
|---|---|---|---|
| * Chassis | |||
| * Compute Node | |||
| * Heterogeneous Node | |||
| * Management Module | |||
| * PCIe Card | |||
| * Fan Module | |||
| * PSU | |||
| Component | Type | Model | Quantity |
|---|---|---|---|
| * Server | |||
| * CPU | |||
| * Memory | |||
| * Fan Module | |||
| Front Disk | |||
| Rear Disk | |||
| RAID Card | |||
| PCIe Card | |||
| * PSU | |||
| Component | Type | Model | Quantity |
|---|---|---|---|
| * Server | |||
| * CPU | |||
| * Memory | |||
| * Fan Module | |||
| Front Disk | |||
| Rear Disk | |||
| LOM | |||
| RAID Card | |||
| PCIe Card | |||
| * PSU | |||
| 部件 | 型号 | 数量 |
|---|---|---|
| * 整机柜型号 | ||
| * 计算节点 | ||
| 管理交换板 | ||
| 业务交换板 | ||
| * 电源 |
| Component | Model | Quantity |
|---|---|---|
| * Chassis | ||
| * Server Node | ||
| * Fan Module | ||
| * PSU | ||
| Component | Type | Model | Quantity |
|---|---|---|---|
| * Server | |||
| * CPU | |||
| * Memory | |||
| * NPU | |||
| * Fan Module | |||
| Front Disk | |||
| Rear Disk | |||
| Middle Disk | |||
| LOM | |||
| RAID Card | |||
| PCIe Card | |||
| * PSU | |||
| Input Current | N/A |
|---|---|
| Input Voltage | N/A |
| Input Power | N/A |
| Apparent Power | N/A |
| Load Power | N/A |
| Idle Input Power | N/A |
| Typical Power | N/A |
| Max Input Power | N/A |
| Extreme Input Power | N/A |
| System BTU Per Hour | N/A |
| CO2 Emissions | N/A |
Terminology
|
|
| Calculation | Definition |
|---|---|
| Input Current |
The current supplied by the power source. Input Current = Apparent Power / Input Voltage |
| Input Voltage | The voltage supplied to a device from an external circuit. |
| Input Power |
The energy received from the power source. The input power varies by server load. |
| Idle input power: | Indicates the power consumed when a server is in the idle state and the CPU enters the deep hibernation state. |
| Maximum input power: | Indicates the power consumed when all components of a server are in the fully-loaded state and the fans adjust their speed automatically. |
| Ultimate input power: | Indicates the power consumed when all components of a server are in the fully-loaded state and the fans spin at full speed (the fans spin at full speed because the CPU or component temperature is too high, the fans are faulty, the temperature sensor fails to read the temperature, or the ambient temperature is too high). |
| Load Power | Power consumption of device (except for power supply device). Load power is equivalent to output power. |
| Apparent Power |
The energy that a device draws from the power supply system to ensure stable running. In contrast to the real power consumed by an AC circuit, apparent power is the maximum power provided by a circuit or the maximum active power consumed by a circuit. Note: Apparent power is greater than input power because there are both energy-consuming components (such as resistors) and energy-saving components (such as inductors and capacitors) on the network. A certain amount of energy is stored on inductors and capacitors in addition to the power (active or input power) required for normal operation of a device. |
| System BTU Hour |
The energy lost to heat during the energy conversion process, measured in British thermal units
(approx 1055 J). System BTU Hour = Input Power x 3600/1055 |
| CO2 Emissions |
The volume of carbon dioxide produced for an hour of server operations. CO2 Emissions (kg/hour) = Input Power/1000 x 0.997 |
|
Power Consumption for ErP Standard Configuration
|
||
|---|---|---|
| Low-end configuration | High-end configuration | |
| Idle state power （W） | ||
| Maximum power (W) | ||
| Idle state power (W) at the higher boundary temperature of the declared operating condition class | ||
| Active state efficiency and performance in active server state | ||
| NOTE: |
| ErP standards apply only to 33 EU countries. |
| For details about the server configuration corresponding to the ErP data, contact the certification contact person. |
